Sharp LC-60LE452U - Disassembly Boards and Brackets

Sharp LC-60LE450U/LC-60LE452U Service manual
8
3.3 Disassembly the Power, Main, 120Hz board, board support and I/O terminal bracket.
Step 1 Remove 8 pcs lock screws ① and detach the power board assembly ②
Step 2 Remove 4 pcs lock screws ③ and detach the 120Hz board ④
Step 3 Remove 4 pcs lock screws ⑤, 2 pcs lock screws ⑥ and detach the main board ⑦
Step 4 Remove 4 pcs lock screws ⑧ and detach the main board support ⑨
Step 5 Remove 2 pcs lock screws ⑩ and detach the I/O terminal bracket
○
11
The detail screws and parts sign as following picture3.3
Picture 3.3
3.4 Harness picture