Sharp LC-80LE642U - CHAPTER 4. REMOVING OF MAJOR PARTS; [1] REMOVING OF MAJOR PARTS

LC-80LE642U
4 – 1
Service Manual
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS
1. Removing of Stand Unit and Rear Cabinet Assy.
1. Remove the 4 lock screws and detach the Stand Unit .
2. Disconnect AC wire and detach the AC cord.
3. Remove the 10 lock screws and 26 lock screws and detach the Rear Cabinet Assy .
[Precautions when mounting and removing the rear cabinet]
If the rear cabinet is removed with the set upright, the speakers may fall; it results in connector disconnection. Therefore, never remove the rear cab-
inet with the set upright.
Be sure to remove the rear cabinet with the screen side down.
2Stand Unit
Rear Cabinet Assy
5
1
3
4
4
4
䎾䎤䎦䏀
䎤䎦䎃䎦䏒䏕䏇
Tighten together with the
Rear Cabinet Assy.
Fix with the 80" LCD Panel Module Unit.
Only one side (outer) can come off.