11
English
Product description
Standing up and adjusting the monitor
CAUTION!
- Pressure from hands on the LCD panel could
cause damage.
Standing up the monitor
Press down on the stand and lift up the top section
of the monitor.
- Be careful not to pinch your fingers.
- When raising the display section, movement
becomes harder in the middle of travel. Continue
raising by applying more force at that point.
- When the monitor is used with an arm mounting,
movement becomes stiffer to keep the display
section from tipping over. This is not a
malfunction.
Adjusting the monitor
Press down on the stand and adjust it to a suitable
viewing angle.
Folding up the monitor
1. Remove the AC adapter and the RGB signal
cable.
2. Press down on the stand and gently fold back the
monitor.
- Be careful not to pinch your fingers.
- Do not use the monitor when tilted back beyond
approximately 25º.The monitor may fall over
leading to injury or malfunction.
approx.25°
approx.5°
Prohibited range
approx.25°
approx.5°
To Next Page
Loading...
