Sharp MD-MT15

ABOUT TRACK NUMBERS
When recording, track numbers will be
created automaticaly.
(Auto marker function/Synchro marker
function)
When recording from analog inputs:
(including digital inputs other than COs.
‘or MiniDiscs)
‘A new track number will automatically be
Created whenever 1 second or more of si-
lence occurs in the source.
(Auto marker function)
prot
=] PIA PrPt Stence TP
When recording from digital inputs:
(CDsiMiniDiscs only)
‘Track numbers willbe created automatically
{or each track atthe same point where track
numbers already exist on the CD or
MiniDisc.
(Synchro marker function)
ee
Teak [Test | Tech
Wa
|
EE] [tac | vacke | taccc}
ck GQ
ss] [pry
@ If there is some noise in the “silent”
‘spaces from the source, the track num
‘bers may not be created at the correct
‘position, depending on the contents of
‘the source being recorded.
© You can also record a series of tracks
without using the auto marker function.
19
‘© The track numbers on the playback side
‘may not match the track numbers re-
corded on the MiniDisc.
‘© When recording, if a programmed play-
‘back is performed by the source or play-
‘back is pertormed by selecting tracks
‘manually, the MiniDisc track numbers
‘may not be the same as on the source.
(© The track numbers can also be changed.
after recording,
© Track numbers may not be created,
‘even when recording trom digital inputs,
<dopending on the CD player usedforthe
source.
ABOUT THE TOC
The TOC (an abbreviation for Table of Con-
tents) is information about the track num-
‘bers and recorded areas that allow the unit.
to find musical selections or sounds. The
‘entire MD is controlled by the information
in this TOC, which enables the unt to find
the beginning of a track quickly or to record
automatically in a vacant area.
© The TOC is recorded in a specific area
on a MiniDisc, which is not used for
About TOC recording
‘When you start recording or editing, “TOC
will appear inthe display.
8 iy
2
This indicates that information in the TOC
is now being changed according to record:
ing or edting being performed.
(© Thechanged TOC information will not
bbe recorded on the MiniDisc right
away.
Notes:
‘© While “TOC” is displayed, the MiniDisc
should not be removed. Tum the power
off frst, and then remove the MiniDisc.
(© The exited contents can be stored on
the disc after several editing steps have
been performed.
1 When is the TOC recorded?
The revised TOC will be recorded on the
disc automatically when you press the
OFF bution while in the stop mode, This,
will also turn the power to this unit off,
eo
{Toc EDIT!
J
\soop Bye! |
The power will be tured off after the TOC
hhas been recorded on the disc,
Caution:
© While “TOC* or “TOC EDITI" is dis:
played, 40 not do any of the following
= Do not jar or bump the main unit.
= Do not unplug the AC adaptor.
= Do not remove the rechargeable bat
tory or alkaline batteries,
Ht you do, the changes in the recorded
oF edited contents will be lost and the
TOC information will not be recorded
property