Sharp MD-MT770 - Editing MD Tracks; Dividing Tracks; Combining Tracks; Moving Tracks

ENGLISH OPERATION MANUAL
105
4. Press the
M
button again.
●
Select the menu within 25 seconds.
●
If you press the CLEAR button during this operation, the previ-
ous display appears.
●
To cancel the operation, move the
M
button toward .
■ Dividing a track (DIVIDE)
You can divide a track into 2 tracks.
1.
Play back the track to be divided, and move the
M
button toward
06 at the point where you want to divide. Playback will be
paused.
2.
Press the
M
button.
The unit enters the menu select mode.
3.
Move the
M
button toward 5 or 4 to select “E (EDIT)” and
press it.
4.
Move the
M
button toward 5 or 4 to select “D (DIVIDE)”
and press it.
5.
Press the
M
button again.
●
Select the menu within 25 seconds.
●
If you press the CLEAR button during this operation, the previ-
ous display appears.
●
To cancel the operation, move the
M
button toward .
■ Combining tracks (COMBINE)
Two adjacent tracks can be combined.
1. Play back the second of the two tracks to be combined and move
the
M
button toward 06 to pause it.
You can also select the track by moving the
M
button toward
5 or 4 in the stop mode.
2.
Press the
M
button.
The unit enters the menu select mode.
3.
Move the
M
button toward 5 or 4 to select “E (EDIT)” and
press it.
4.
Move the
M
button toward 5 or 4 to select “C (COMBINE)”
and press it.
5.
Press the
M
button again.
●
Select the menu within 25 seconds.
●
If you press the CLEAR button during this operation, the previ-
ous display appears.
●
To cancel the operation, move the
M
button toward .
■ Moving a track (MOVE)
You can move a track to the desired position.
1.
Play back the track to be moved, and move the
M
button toward
06 to pause it.
You can select the track by moving the
M
button toward 5 or
4 in the stop mode.
2.
Press the
M
button.
The unit enters the menu select mode.
3.
Move the
M
button toward 5 or 4 to select “E (EDIT)” and
press it.
4.
Move the
M
button toward 5 or 4 to select “M (MOVE)”
and press it.
5.
Move the
M
button toward 5 or 4 to locate the position it
is moved to.
6.
Press the
M
button.
●
Select the menu within 25 seconds.
●
If you press the CLEAR button during this operation, the previ-
ous display appears.
●
To cancel the operation, move the
M
button toward .
■ Moving a track to another group (GROUP CHANGE)
You can move a track to a different group.
1. While the track to be moved is being played, move the
M
button
toward 06 to pause it.
You can also select the track by moving the
M
button toward
5 or 4 in the stop mode.
2. Press the
M
button.
The unit enters the menu select mode.
3.
Move the
M
button toward 5 or 4 to select “G (GROUP)”
and press it.
4.
Move the
M
button toward 5 or 4 to select “C
(GrCHANGE)” and press it.
5.
Move the
M
button toward 5 or 4 to select the group the
track is moved to.
6.
Press the
M
button.
●
Select the menu within 25 seconds.
*P96˜107-ENGLISH 01.6.30, 1:34 PM105