Sharp MX-3070V User Manual

BEFORE USING THE MACHINE
17
LOAD PAPER INTO THE TRAY 1 - 4
1
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of
paper, go to the next step.
2
Adjust guide plates A and B to match
the longitudinal and transversal
dimensions of the paper to be loaded.
• The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
Adjust to the non-standard paper size so that the paper
will not be too loose or too tight.
• To load SRA3 paper, the position of the guide must be
adjusted. For details, see the User's Manual.
3
Insert the paper into the tray.
Load the paper with the print side facing up. The stack must
not be higher than the indicator line.
Fan the paper well before loading it. Otherwise, multiple
sheets may feed at once and cause a misfeed.
4
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
A
B

Sharp MX-3070V Specifications

General

Print Technology	Laser
Print Speed	30 ppm
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Memory (RAM)	5 GB
Hard Disk Drive	500 GB
Max Paper Size	A3
Paper Capacity	650 sheets (expandable to 6, 300 sheets)
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Type	Multifunction Printer
Original Size	A3
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux
Display	10.1" (diagonal) color LCD touchscreen
Weight	85 kg