Sharp MX-3070V User Manual

18
BEFORE USING THE MACHINE
LOADING PAPER IN OTHER TRAYS
Bypass tray
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
1
Open the bypass tray.
When loading paper larger than A4R or 8-1/2" x 11"R, pull
out the extension guide.
Pull the extension guide all the way out.
2
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
3
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.
When loading envelopes in the bypass tray, set the paper type.
►
CHANGE THE SETTING OF THE PAPER TRAY (page 21)

Sharp MX-3070V Specifications

General

Print Technology	Laser
Print Speed	30 ppm
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Scan Resolution	600 x 600 dpi
Warm-up Time	20 seconds
Memory (RAM)	5 GB
Hard Disk Drive	500 GB
Max Paper Size	A3
Paper Capacity	650 sheets (expandable to 6, 300 sheets)
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Type	Multifunction Printer
Original Size	A3
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux
Display	10.1" (diagonal) color LCD touchscreen
Weight	85 kg