Sharpdesk Mobile Operation Manual
9
Copyright © 2012 SHARP CORPORATION All rights reserved.
5 Set Up User Information
Set up the user information for letting the scanner display the scan destination when the device receives
scanned data from the scanner.
I. Tap “Setting” on Top Menu screen.
II. Tap “Set up User Information”.
III. Set up “Display Name” for letting scanner display it as scan
destination when the device receives scanned data from the
scanner. The default value is same as the value of “Name” in
the device’s user information.
“Character Search” is used for the sort key on displaying
“Display Name” in the address book screen of the scanner.
Set to “I(ON)” in “Profile Automatic Delete” if deleting the
destination on the scanner after scan is completed.
To Next Page
Loading...
