9
SUPPLIES
Standard supplies for this product that can replaced by the user include paper,
toner cartridges, and staple cartridges for the finisher.
Be sure to use only SHARP-specified products for the toner cartridges, finisher
staple cartridge, and transparency film.
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the
machine which may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be
considered as spare parts. Consumables too, are available for 7 years following the termination of production.
Proper storage
1. Store the supplies in a location that is:
•clean and dry,
•at a stable temperature,
•not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or
become damp, resulting in paper misfeeds.
GENUINE SUPPLIES
For best copying results, be sure to use only Sharp Genuine
Supplies which are designed, engineered, and tested to
maximize the life and performance of Sharp products. Look
for the Genuine Supplies label on the toner package.
Storage of supplies
Supply of spare parts and consumables
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store
a toner cartridge standing on end. If stored standing on end, the toner may
not distribute well even after shaking the cartridge vigorously, and will remain
inside the cartridge without flowing out.
Staple cartridge
The finisher require the following staple cartridge:
MX-SCX1 (for finisher)
Approx. 5000 per cartridge x 3 cartridges
To Next Page
Loading...
Need help?
General
