7-19
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed.
*2 This function is not available in some countries and regions.
Fax Data Receive/Forward (Manual)
*1 When a facsimile expansion kit is installed.
*2 When an internet fax expansion kit is installed.
• Allow/Reject Mail or Domain Name Setting All Invalid No Yes
•Add New – No Yes
Server Settings No Yes
Receive Settings No Yes
• Internet Fax Receive Enabled No Yes
• POP3 Server – No Yes
• Port Number 110 No Yes
• POP Authentication Disabled No Yes
• User Name – No Yes
•Password – No Yes
- Change Password Disabled No Yes
• POP3 Communication Timeout 60sec. No Yes
• Reception Check Interval Setting 5 minutes No Yes
• Enable SSL Disable No Yes
Default Settings No Yes
• I-Fax Own Name and Address Set No Yes
- Set I-Fax Own Name – No Yes
-Own Address – No Yes
• Direct SMTP Setting No Yes
- Port Number (Receive) 25 No Yes
- Timeout 300 seconds No Yes
- Port Number (Send) 25 No Yes
- Timeout 300 seconds No Yes
Setup Items Factory default setting U A
l Fax Data Receive/Forward (Manual) (page 7-108)
Fax Settings
*1
See "Fax Data Receive/Forward
(Manual) (page 7-191)".
Yes Yes
Internet Fax Settings
*2
Yes Yes
Reception Start – Yes Yes
Manual Reception Key in Initial Screen Enabled Yes Yes
Forward Received Data – Yes Yes
Setup Items Factory default setting U A
To Next Page
Loading...
