20
BEFORE USING THE MACHINE
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
Fold the flap and make a sharp crease at the fold.
3
Insert the paper along the bypass tray
guides all the way into the bypass tray
until it stops and adjust the right-side
guide.
Load paper with the print side facing down.
The stack must not be higher than the indicator line.
A maximum of 500 sheets of paper can be loaded into the
tray.
• Do not force the paper in.
• If the bypass tray guides are set wider than the paper, move the bypass tray guides in until they correctly fit the width
of the paper. If the bypass guides are set too wide, the paper may skew or be creased.
4
Press the operation button.
The paper table goes up. The operation button blinks while
the paper table goes up. The button lights up when the
paper table has gone up.
To Next Page
Loading...
