Sharp MX-6580N - Page 25

BEFORE USING THE MACHINE
25
CHANGE THE SETTING OF THE PAPER TRAY
To change the paper loaded in the tray, change the machine's tray settings from [Tray Settings] in the home screen.
As an example, the steps for changing the paper in tray 3 from 8-1/2" x 14" plain paper to 8-1/2" x 11" recycled paper are
explained below.
1
Press the [Home Screen] key.
Home screen appears.
2
Tap the [Tray Settings] key.
3
Tap the key of the paper tray 3.
4
Set the paper type.
(1) Tap the tab for the Paper Type.
(2) Tap the [Recycled] key.
5
Set the paper size.
(1) Tap the tab for the Paper Size.
(2) Tap the [Auto-Inch] key.
(3) Tap in "Tray Settings".
10:15 AM
Operation
Guide
Enlarge
Display Mode
Toner Quantity
Bk
C
M
Y
Settings Total Count LCD Control Job Status
Address
Control
Manual
Finishing
HDD
File retrieve
Tray Settings
Tray Settings
Paper Tray
Bypass Tray
Large Capacity Tray
Inserter(Upper)
Inserter(Lower)
Plain 1
8½x11
Plain 1
8½x11
Plain 1
8½x11
Plain 1
8½x14
Plain 1
11x17
Plain 1
11x17
Plain 1
11x17
2
Plain 1
8½x11
5
5
3
4
3
4
1
2
1
10:15 AM
Operation
Guide
Y
Enlarge
Display Mode
Toner Quantity Bk
Settings Total Count LCD Control Job Status
Address
Control
10:15 AM
10:15 AM
Operation
Guide
Y
Enlarge
Display Mode
Settings Total Count LCD Control Job Status
Address
Control
Tray 3
Feeding
Approved Job
Paper Property
Type: Plain 1
Please Select Paper Type.
Size: Auto-Inch
Tray Settings
Plain 1
(60-89g/m
2
)
Plain 2
(90-105g/m
2
)
Heavy Paper 1
(106-176g/m
2
)
Heavy Paper 2
(177-220g/m
2
)
Recycled
Color
User Type 1
User Type 4 User Type 5 User Type 6
User Type 2 User Type 3
Pre-PunchedLetter Head
Pre-Printed
(1)
(2)
10:15 AM
Operation
Guide
Y
Address
Control
Enlarge
Display Mode
Settings Total Count LCD Control Job Status
Tray 3
Feeding
Approved Job
Paper Property
Type: Recycled
Size:
Tray Settings
Auto-Inch
Auto-AB
Auto-Inch
Size Set
Auto-AB
Auto-Inch
12x18(A3W),11x17, 8½ x14,
8½ x11, 8½ x11R,
7½ x 10½R
A3W(12x18),A3,
216x330(8½x13),A4,A4R,
B4,B5,B5R,
(1)
(2)
(3)