Sharp MX-6580N

48
Fax Problems
BROADCAST TRANSMISSION DOES NOT WORK
Check Solution
Has broadcast setting been disabled
in the setting mode (administrator)?
■ Broadcast transmission cannot be performed when "Settings (administrator)" -
[System Settings]
→ [Image Send Settings] → [Fax Settings] → [Send Setting]
→ [Disable Fax Broadcasting] is disabled.
I DON'T KNOW HOW TO CHECK AN ADDRESS
WHEN SENDING A FAX
Check Solution
Tap the [Address Review] key. ■ Tap the [Address Review] key to view a list of the addresses.
Is "Fax Dest. Confirmation Mode"
enabled in setting mode?
■ Enable "Settings (administrator)" - [System Settings] → [Image Send Settings] →
[Fax Settings] → [Default Settings] → [Fax Dest. Confirmation Mode]. When this
setting is enabled, an address confirmation message will appear when you send
a fax to prevent erroneous transmission.
?
!
?
!