Sharp MX-7580N Quick Start Guide

BEFORE USING THE MACHINE
9
(1) Finisher (50-sheet stapling)*
This staples and outputs paper.
(2) Punch module (MX-PN13B)*
This punches and outputs paper.
(3) Inserter*
Covers and insertion sheets to be inserted into printed sheets
can be loaded.
Using the manual finishing function, you can directly feed paper
into the finisher or saddle stitch finisher to staple, punch or fold
the paper.
► MANUAL FINISHING (page 59)
(4) Status indicator*
The status of the machine is indicated.
(5) Bypass tray*
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" × 11"R or A4R, pull out
the extension guide.
► LOADING PAPER IN OTHER TRAYS (page 18)
(6) Saddle stitch finisher (50-sheet stapling)*
This staples and folds paper.
(7) Finisher (100-sheet stapling)*
This staples and outputs paper.
(8) Saddle stitch finisher (100-sheet stapling)*
This staples and folds paper.
(9) Trimming module*
This trims the excess of saddle-stitched output.
(10) Folding unit*
This folds and outputs paper.
(11) Curl correction unit*
This punches and outputs paper.
(12) Paper pass unit*
This feeds paper to the machine.
(13) Large capacity trays*
Store paper in this tray. Up to 2500 sheets can be stored in each
tray.
► LOADING PAPER IN OTHER TRAYS (page 18)
* Peripheral device. For more information, see the User's Manual.
(9)(8) (10) (11) (12) (13)
(3) (5)(2)
(1)
(6) (7)
(4)

Sharp MX-7580N Specifications

General

Brand	Sharp
Model	MX-7580N
Category	All in One Printer
Language	English