Sharp MX-7580N - Page 45

45
Fax Problems
DIALING IS NOT POSSIBLE
Check Solution
Is the extension telephone
connected?
■ Check the connections.
Check the telephone line jack, the wall jack, and any extension adapters to make
sure that all connections are secure.
Is the external telephone enabled in
setting mode?
(When an external telephone is
connected)
■ Ask your administrator to enable [External Telephone Setting].
⇒ "Settings (administrator)"
→ [System Settings] → [Image Send Settings] →
[Fax Settings]
→ [Default Settings] → [External Telephone Setting] →
Is the line busy? ■ Wait until the communication is completed.
YOU CANNOT TALK TO THE OTHER PARTY
Check Solution
Did you dial using the speaker? ■ Use the extension telephone.
When you dial using the speaker, you will be able to hear the voice of the other
party, but he or she will not hear your voice. Use the extension telephone. (When
the optional receiver or extension telephone is not installed, you cannot talk to the
other party.)
AN ADDRESS (A ONE-TOUCH INDIVIDUAL KEY
OR GROUP KEY) CANNOT BE STORED
Check Solution
Has the maximum number of keys
been stored?
■ Adjust the number of stored keys.
Delete addresses (one-touch keys and group keys) that are not being used.
?
!
?
!
?
!