Sharp MX-M5071 Troubleshooting

21
General Problems
PUNCHING DOES NOT TAKE PLACE
Check Solution
Does a message appear instructing
you to check the punch module?
■ Dispose of punch scraps.
► Maintenance
(page 6)
Is a different size of paper mixed in? ■ Punching is not possible when different widths of paper are mixed together. To perform
mixed size punching, use paper of the same width and select the [Same Width] setting.
When copying, select [Same Width] for [Mixed Size Original] in [Others].
Is a paper size that cannot be
punched included in the print job?
■ For the paper sizes that can be punched, see "SPECIFICATIONS" in Start Guide.
Is the tray selected in the printer
driver set to a paper type that cannot
be punched?
■ Check the paper type settings in the machine and select a tray that has paper
that can be used for punching*. Click the [Tray Status] button in [Paper Source]
tab of the printer properties window and check the paper type setting of each tray.
*Punching is not possible on labels, tab paper, glossy paper, transparency film,
and envelopes. In addition, if "Disable Punch" is selected in the user type,
punching will not be possible.
THE STAPLING POSITION OR PUNCH POSITION
IS NOT CORRECT
Check Solution
Is the stapling position setting
correctly?
■ Check the stapling position in "PREVIEW SCREEN".
Are the punching positions setting
correctly?
■ Check the punch position in "PREVIEW SCREEN".
FOLDING DOES NOT TAKE PLACE
Check Solution
Did the administrator enable the
[Disabling of Duplex] setting?
■ The paper folding function cannot be used when [Disabling of Duplex] is enabled
in the setting mode. Check with your administrator.
 In "Settings (administrator)", [System Settings] → [Common Settings]
→ [Condition Settings] → [Device Control] → [Disabling of Duplex].
Are you using a paper type that has a
specific front and reverse side?
■ The folding function cannot be used with pre-printed paper, letterhead paper, or
other paper that has specific front or reverse sides.
When folding paper, use a paper type such as plain paper that does not have
specific front or reverse sides.
?
!
?
!
?
!

Sharp MX-M5071 Specifications

General

Print Technology	Laser
Print Speed	50 ppm
Print Resolution	1200 x 1200 dpi
Standard Paper Capacity	650 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Scan Resolution	600 x 600 dpi
Memory	5 GB
Hard Disk Drive	500 GB
Copy Resolution	600 x 600 dpi
Maximum Paper Capacity	6300 sheets
Scanner Type	Color Scanner
Display	10.1-inch color LCD touchscreen
Network Connectivity	Ethernet
Type	Multifunction
Original Size	11 x 17 inches
Copy Speed	50 ppm
Fax Resolution	400 x 400 dpi
Weight	176 lbs