Sharp MX-M5071 Troubleshooting

5
General Problems
Placing the original and adding paper
Do not exceed the
indicator line
Align the edges and place
face up Insert all the way in
Adjust to the original size
If the original has a fold, straighten the fold before
placing. (This prevents original misfeeds and incorrect
detection of the original size)
●Automatic Document Feeder
●Document glass
Place the original in the back left corner.
If the original has a fold, straighten the fold before placing.
(This prevents original misfeeds and incorrect detection of
the original size)
Mark
Platen
Scale
Original size detector
●Paper tray
Fan the paper
well before
loading it.
Set the guides to the size of the paper.
The paper must not exceed the maximum number of
sheets and must not be higher than the indicator line.
●Bypass tray
Pull the extension guide all the way
out. (A4R (8-1/2 x 11"R) or more)
Load the paper with the print
side facing down.
Adjust the bypass tray
guides so that they slightly
contact the loaded paper.
Is the original placed correctly?
Is the paper loaded correctly?
The paper must not exceed
the maximum number of
sheets and must not be
higher than the indicator line.
If the original is stapled, be sure to remove the staples and
fan the pages well before placing. (This is to prevent
misfeeding and tearing of the original, and to prevent torn
fragments of the original from remaining in the feeder.)
(Tray 1 only)

Sharp MX-M5071 Specifications

General

Print Technology	Laser
Print Speed	50 ppm
Print Resolution	1200 x 1200 dpi
Standard Paper Capacity	650 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Scan Resolution	600 x 600 dpi
Memory	5 GB
Hard Disk Drive	500 GB
Copy Resolution	600 x 600 dpi
Maximum Paper Capacity	6300 sheets
Scanner Type	Color Scanner
Display	10.1-inch color LCD touchscreen
Network Connectivity	Ethernet
Type	Multifunction
Original Size	11 x 17 inches
Copy Speed	50 ppm
Fax Resolution	400 x 400 dpi
Weight	176 lbs