Sharp MX-M565N User Manual

Energy is expensive /This is Why we design MFPs that
cost less to run.
The MX-M565N, MX-M465N, and MX-M365N have industry-
leading green credentials. Biomass plastic, breakthrough toner
technology, an energy-efficient fuser with short warm up
times, intelligent power saving and low-energy LED lamps -
it all adds up to our most environmentally-friendly design yet.
Clever construction, kinder consumables
We’ve used biomass plastic, made from plant matter, in the
construction of the MFPs. Plus, we’ve developed a new toner
- Mycrostoner-CAP™ - which significantly reduces energy
consumption on every page that you print, because it can be
melted at lower, cost-efficient temperatures.
Intelligent power saving
Most MFPs can switch themselves into ‘sleep’ mode after a
set period of inactivity. But the MX-M565N, MX-M465N and
MX-M365N do a whole lot more.
They can ‘learn’ your usage patterns and go to sleep when
they predict a period of inactivity, and you can schedule set
times for the MFP to turn itself on or off.
You can save even more money with the Auto Power Shut
Off feature which sends the MFP to sleep when it has finished
a job. At other times, you can simply use the manual power-
save button.
Eco Scan
If you’re doing something that doesn’t need the fuser –
scanning documents, for example – the Eco Scan feature
will help you save even more money by keeping the fuser
switched off.
Eco Recommendation
We recognise that busy people sometimes forget the need to
conserve energy and natural resources. To help, our MFPs can
prompt users with a message that gives useful advice about
efficient printing. And there’s even an Eco Mode button to
configure the MFP with all of its most efficient settings.
3
SUPPORTING YOUR
ENVIRONMENT
Do More. Use Less.

Sharp MX-M565N Specifications