Sharp Plasmacluster AE-A09DJ - AUXILIARY MODE OPERATION; TURNING THE UNIT ON VIA AUX BUTTON; TURNING THE UNIT OFF VIA AUX BUTTON

AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Lift the front panel of the indoor unit and press the AUX.
button on the operation panel.
• The red OPERATION lamp ( ) on the unit will light and
the unit will start operating in the AUTO mode.
• The fan speed and temperature setting are set to AUTO.
TO TURN OFF
Press the AUX. button on the operation panel again.
• The red OPERATION lamp ( ) on the unit will turn off.
NOTE:
If the AUX. button is pressed during normal operation,
the unit will turn off.
14
AUX.