Sharp Plasmacluster AE-X12LSR - Adjusting the Air Flow Direction; Full Power Operation

GB-6
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air fl ow direction
with the louver lever.
CAUTION:
Never attempt to adjust the vertical airfl ow lou-
vre manually.
• Manual adjustment of the vertical airfl ow lou-
vre can cause the unit to malfunction.
• When the vertical adjustment louvre is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may result.
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button.
• The vertical airfl ow louvre will swing.
2
Press the SWING button again
to stop the desired position.
ADJUSTING THE AIR FLOW
DIRECTION
1
2
Louvre levers
The air conditioner works at the maximum
power to makes the room cool or warm
rapidly.
1
During operation, press the
FULL POWER button.
• The remote control will display “ ”.
• The temperature display will go off.
• The green FULL POWER lamp (
) will
light up.
TO CANCEL
Press the FULL POWER button again.
• The green FULL POWER lamp ( ) will
turn off.
NOTE:
• The air conditioner will operate at “Extra
HIGH” fan speed for 5 minutes, and then shift
to “HIGH” fan speed.
• You can not set the temperature or fan speed
during the FULL POWER operation.
1
FULL POWER OPERATION
COOL and DRY modes
HEAT mode
Adjustment range