55
E
n
Starting the secondary display
In whiteboard mode:
1. Start whiteboard mode.
2. Displays the whiteboard in a window. (Page 16)
3. Move the window of the whiteboard to the secondary display.
4. Maximize the window of the whiteboard. (Page 16)
In overlay mode:
1. Follow the step 1-4 above.
2. Exit whiteboard mode.
3. Start overlay mode.
TIPS
• The display that started is stored. The stored display is started.
• If the “Startup display when secondary display exists” setting is set to “Show dialog and select”, you can select the monitor
that is displayed when this software is started.
To Next Page
Loading...
