Need help?Do you have a question about the Sharp PN-E601 and is the answer not in the manual?
General| Contrast Ratio | 4000:1 |
|---|---|
| Viewing Angle (H/V) | 176° / 176° |
| VESA Mount | Yes (400 x 400 mm) |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Screen Size | 60 inch |
| Resolution | 1920 x 1080 |
| Response Time | 8 ms |
| Connectivity | HDMI, DVI-D, DisplayPort |
| Built-in Speakers | Yes |
Details the physical components on the front of the monitor, including the LCD panel, sensor, and buttons.
Details the physical components on the rear of the monitor, including input terminals and vents.
Details the buttons and functions of the remote control unit for operating the monitor.
Explains how to select the video input source from various terminals.
Details how to adjust the audio volume and backlight brightness.
Detailed description of SCREEN menu options like Clock, Phase, and Position.
Detailed description of PICTURE menu options like Contrast, Color, and Sharpness.
Detailed description of AUDIO menu options like Treble, Bass, and Balance.
Detailed description of SETUP menu options like OSD position and language.
Guides for automatic and manual PC screen adjustments for optimal display.
Options for restoring factory default settings for the entire monitor.
Details on IDLK, IDST, IDSL, IDCK commands for managing multiple monitors.
Setting multiple monitors with a single command without individual ID assignment.
Transferring, saving, activating, and checking GAMMA user data via RS-232C.
How to configure the monitor's IP address, subnet mask, and gateway.
Accessing and configuring monitor network settings through Internet Explorer.
Steps to launch IE, enter monitor IP, and navigate the web interface for control.
Using the web interface to change screen, picture, audio, and other settings.
Configuring DHCP, IP Address, Subnet Mask, Default Gateway, and DNS Server.
Setting up user name, password, and IP address restrictions for monitor access.
Setting up Simple Network Management Protocol (SNMP) for network monitoring.
Diagnosing and resolving issues with lack of video or audio output.
Addressing unstable video, input signal compatibility, and display errors.
Addressing auto dimming, cracking sounds, and LED flashing due to monitor temperature.
To Next Page
