To Next PageTo Next Page
Need help?Do you have a question about the Sharp PN-LC752 and is the answer not in the manual?
General| Pixel pitch | 0.372 x 0.372 mm |
|---|---|
| LED backlight | Yes |
| Response time | 8 ms |
| Display diagonal | 75 \ |
| Surface hardness | 8 |
| Display brightness | 450 cd/m² |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Touchscreen technology | Infrared |
| Contrast ratio (typical) | 1200:1 |
| Display number of colors | 1.073 billion colors |
| Display diagonal (metric) | 189.3 cm |
| Active display area (W x H) | 1649.7 x 927.9 mm |
| Number of simultaneous touchpoints | 20 |
| DVI port | No |
| USB connector type | USB Type-A, USB Type-B, USB Type-C |
| USB ports quantity | 6 |
| HDMI ports quantity | 4 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| HDMI input ports quantity | 3 |
| HDMI output ports quantity | 1 |
| USB 2.0 Type-B ports quantity | 2 |
| RMS rated power | 30 W |
| Orientation | Horizontal |
| Screen shape | Flat |
| Mounting type | Wall |
| Product color | Black |
| Product design | Digital signage flat panel |
| Bezel width (side) | 21.9 mm |
| Placement supported | Indoor |
| Bezel width (bottom) | 53.2 mm |
| Panel mounting interface | 800 x 600 mm |
| Purpose | Education |
| Pen type | Passive pen |
| Operating hours (hours/days) | 16/7 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 2 W |
| Power consumption (typical) | 420 W |
| Internal memory | 8 GB |
| Processor family | ARM Cortex |
| Processor architecture | ARM Cortex-A55 |
| Processor manufacturer | ARM |
| Internal storage capacity | 16 GB |
| Operating system installed | Android 11 |
| Package depth | 225 mm |
| Package width | 1900 mm |
| Package height | 1125 mm |
| Package weight | 63000 g |
| Cables included | AC, USB |
Weight and Dimensions| Display depth | 87.1 mm |
|---|---|
| Display width | 1722.5 mm |
| Display height | 1032.1 mm |
| Display weight | 51000 g |
Details electrical safety standards, including wiring color codes and the importance of earthing.
Warns about potential instability and injury risks associated with incorrect product placement or support.
Provides critical warnings against exposing the product to moisture and opening the enclosure to prevent hazards.
Explains the meaning of hazard symbols (lightning flash, exclamation point) used on the product.
Outlines EMC regulations and the need for shielded cables for specific terminal connections.
A welcome message for new customers, encouraging review of safety precautions before use.
Covers essential guidelines for safe operation, environmental conditions, and handling to prevent damage or injury.
Addresses risks related to electrical overload, power cord damage, battery handling, and physical components.
Details procedures for cleaning, servicing, repairs, and the use of authorized replacement parts.
Advises against product modification and emphasizes correct electrical connection for Class I apparatus.
Highlights risks of monitor tipping and provides crucial advice for child safety during operation.
Provides guidelines on suitable operating environments, placement, usage duration, and screen care.
Details safe usage of the power cord and restrictions for wireless LAN functionality.
Covers VESA compliance, dealer consultation, wall material, weight endurance, and screw specifications for mounting.
Details safe handling during installation, temporary placement, and securing the monitor post-mounting.
Lists all components supplied with the monitor, including cables, remote, and mounting hardware.
Instructions for inserting batteries into the remote control unit.
Guidance on connecting the wireless adapter to the monitor's USB port.
Identifies all input and output terminals on the front and rear of the monitor.
Provides specific notes on connecting USB cables and touch panel terminals.
Advice on properly clamping the power cord using the supplied cable clamp.
Instructions for using the touch panel with computer connections and downloading software.
Lists trademarks and registered trademarks of various companies and technologies.
Step-by-step guide on how to turn the monitor on using the power button.
Explains the meaning of different LED light statuses (blue, orange) and their corresponding monitor states.
Emphasizes using the main power switch for turning the unit on/off and disconnecting the cord.
Guides through initial language, date, time, and operation mode settings.
Instructions on how to properly turn off the monitor and save application data.
Provides technical specifications including model, power, operating conditions, dimensions, and weight.
Specific precautions for dealers and service engineers regarding monitor installation and handling.
Steps for securing the monitor tray using the provided mounting screws.
Declares compliance of the wireless adapter with EU directives and provides a link to the full text.
Details the frequency range and transmit power of the wireless adapter.
Provides declarations of conformity in various European languages.
Lists usage restrictions for wireless adapters in different countries/regions.
Specific notice for users in the United Kingdom regarding wireless adapter compliance.
