>>
<<
On-Screen Display Menu
Example
System Options (Continue)
PUBLIC MODE
7. MENU BUTTON
Selection Selection between “Respond” and “No respond”
Default Respond
Explaination
In “No respond” setting, the menu operation by the menu key of the remote control and the menu key of the unit
are invali-dated.
Limit in Setting
Exception
Remarks
8. AV POSITION FIXED
Selection Selection between “Variable” and “Fixed”
Default Variable
Explaination In case of “Fixed” setting,
–Menu “Picture” and “Audio” setting can't be changed like “Dynamic (Fixed)”.
–When “AV Mode” key is pressed, Monitor just displays current AV Mode (cannot be changed.).
Limit in Setting None
Exception None
Remarks
When receiving AV Position key and other direct audio select keys, the current display stays on and no setting
can be changed.
9. ON SCREEN DISPLAY
Selection Selection between “Yes”, “No”
Default Yes
Explaination
At the “No” setting, all OSD except public mode menu arenot displayed on screen. An input selection is
immediately made because the menu is not displayed.
Limit in Setting Keys falling under any of the following items become invalid.
Appearance of screen changes and the sound changes.
Personal functions which are hard to restore.
Screen display, menu, OFF-timer, AV MODE, screen size switching, AUDIO ONLY, sound changeover,
LANGUAGE, CLOSED CAPTION
Others Simple input switching is generated
Exception Such a caution which is displayed independently is displayed as it is. Non-responding signal caution
Remarks When CC has already been ON, CLOSED CAPTION is displayed.
ENG 4-26
To Next Page
Loading...
