58 | Page
If error message ……………05 then card was not recorded. A
completed successful recording on one or more cards is
indicated by the 0. display
LOD AUT / DEF modes. Pressing LOD results in a flashing BUSY
followed by a solid CARD prompt. Insert card and observe
solid CARD prompt changes to flashing CARD display. Pull
card out and either the LOD is complete (one card side) or a
solid CARD prompt is displayed asking for the next side of
card to be read. There is a time limit for insertion and
pulling the card.
If error message ……………05 appears then card was not
loaded correctly. A completed successful recording on one
or more cards is indicated by the 0. display.
CHK AUT / DEF modes. Once card or series of cards is / are read,
pressing CHK will confirm the card was recorded correctly.
Press CHK and observe flashing BUSY then solid CARD
prompt. Insert the card and pull. If read and correctly
checked then you will observe 0. or a CARD prompt for the
next prompt. There is a time limit for insertion and pulling
the card.
If error message ……………05 appears then card was not loaded
correctly. A completed successful recording on one or more cards is
indicated by the 0. display.
To Next Page
Loading...
