To Next PageTo Next PageWhy my Sharp Microwave Oven does not operate at all?
If your Sharp Microwave Oven isn't turning on, ensure it's properly plugged into a functioning power outlet. Check the power supply to confirm it's delivering electricity to the unit.
Why does the Sharp R-210A Microwave Oven fuse blow when plugged in?
If the 13A fuse blows immediately when you plug your Sharp Microwave Oven into the wall outlet, check the power cord for any signs of damage or shorting.
Why does the Sharp R-210A Microwave Oven fuse blow when the door is opened?
If the 13A fuse blows when you open the door of your Sharp Microwave Oven, inspect the door switch for malfunctions.
What to do if my Sharp Microwave Oven shuts down before the end of the cooking cycle?
If your Sharp Microwave Oven stops mid-cycle, make sure the door is fully and securely closed during operation.
How to fix Sharp R-210A Microwave Oven lamp that does not light?
If the oven lamp in your Sharp Microwave Oven isn't lighting up, but the fan motor is still running, you should replace the oven lamp.
General| Turntable | Yes |
|---|---|
| Voltage | 120V |
| Turntable Diameter | 10 inches |
| Preset Cooking Programs | 6 |
| Type | Countertop |
| Capacity | 0.6 cu. ft. |
Critical safety warnings for personnel working on the oven, including capacitor discharge.
Lists essential pre- and post-servicing checks (3D/4R) and general troubleshooting guidance.
Details tests for individual electronic components like magnetron, transformer, and switches.
Procedures for measuring microwave power output using water load methods.
Provides crucial safety warnings and wiring precautions before component replacement.
Procedure for removing and reinstalling the magnetron unit.
Details on adjusting door latch and monitor switches for proper operation.
