To Next PageTo Next Page
Need help?Do you have a question about the Sharp R-9H10 and is the answer not in the manual?
General| Brand | Sharp |
|---|---|
| Model | R-9H10 |
| Category | Microwave Oven |
| Language | English |
Detailed technical specifications including power, dimensions, and control features.
Explanation of touch pads, their functions, and basic operation sequences.
Details the sequence of component functions during oven operation.
Describes the state and initial actions when the oven is plugged in and the door is closed.
Explains the operational sequences for High cooking and other microwave power levels.
Details the process and component actions during the preheating phase.
Describes the sequence of operations for convection cooking after preheating.
Explains the process for combined convection and microwave cooking.
Describes automatic computation of time and temperature for cooking.
Details the special function for faster and better meat/poultry defrosting.
Explains the role of the thermistor in temperature detection for the convection heater.
Describes the safety device preventing overheating of the convection heater.
Explains the function of the monitor switch in relation to door interlocks and fuse blowing.
Details the function of upper and lower latch switches for door interlock.
Explains how the convection heater heats air circulated by the fan.
Explains how the damper motor controls the damper door position during cooking modes.
Describes the components and operation of the damper open-close mechanism.
Provides a systematic approach to diagnosing and resolving oven issues.
Procedures for testing the magnetron for open filament or shorts.
Steps to measure transformer coil resistance and check continuity.
Steps to check the high voltage capacitor and test switch contacts.
Procedures for testing thermal cut-outs, heaters, and thermistors.
Procedures for testing the touch control panel, sensors, and control unit.
Step-by-step guide to remove the outer cabinet and control panel for servicing.
Instructions for removing and reinstalling the power transformer and rectifier assemblies.
Procedures for removing magnetron, cooling fan motor, convection motor, and damper assembly.
Steps for replacing the oven lamp, door interlock switches, and door assembly.
Instructions for removing the control panel assembly and disassembling the oven door.
Detailed steps for removing and reinstalling the oven door assembly.
How to adjust the door for proper latching and alignment.
Specifies the maximum allowable microwave radiation emission level.
Steps to prepare the oven and test instruments for leakage testing.
List of electrical components with part numbers and descriptions.
List of external, structural, and control panel components.
Lists door components, racks, manuals, and packing accessories.
