Sharp R-9H10 User Manual

R-9HlO
OFF
CONDTION
COOKING
CONDTION
IYE-)
I
CONVEC-
TION
(SENSOR)
Problem
Home fuse blows when power cord is plugged into
wall receptacle.
Fuse blows when power cord is plugged into wall
receptacle.
88:88 do not appear in display when power cord is
first plugged into wall outlet.
Display does not operate properly when STOP/CLE
AR Key is touched. (Beep should sound and trme
of day should appear in display.)
Oven lamp does not light with door opened.
Oven lamp does not light in cook cycle.
(Does light when door is opened)
Oven lamp does not light at all.
Oven lamp lights, but turntable motor does not
operate.
Cooling fan motor does not operate
Oven does not go into a cook cycle when START
pad is touched.
Oven seems to be operating but little or no heat is
produced in oven load.(Food incompletely cooked
or not cooked at all at end of cook cycle.)
Oven goes into a cook cycle but extremely uneven
heating is produced in open load(food).
Oven does not cook properly when programed for
MEDIUM etc. cooking powers.(Operates properly
on HIGH)
Oven does not cook properly when programed in
EASY DEFROST cooking mode.
CONV indicator light but oven does not go into a
cook cycle when START pad is touched.
CONV indicator lights, but heating element does
not heat.
Temperature in the oven cavity is lower or higher
Convention cycle runs 1 minute then shuts down.
Convection cycle runs 3 minutes then shuts down.
Oven is in the sensor cooking condition but AH
sensor dbes not end stage 1 or does not stop
cooking cvcle or the oven stops soon.
E
t;;
‘0
C
‘;
52
m
?
c
‘G
:
kt
x
2
0
2
zi
oc
.?i
3
2
Yi E 5
E F
VI
tr OJ
ii Jx 0
:
% s 3
5
iij .!i o
.?t
g E
I-’
z
ii
E
ii J
2
c
L
E
E
!2
z
$
G
b
3 ::I p
if
a’rg 2 $ OZI E .g
- v)
El
$ 0 .z
n .tl
y ;,“52
C
.-
6)
6
r”
5
r”
6
E
2
3; 0”
a m 0 0 w u (3 I -&iu
,a
0
0
0
0
0
0
0
0
0
0 0 0
0’
12

Sharp R-9H10 Specifications

General

Brand	Sharp
Model	R-9H10
Category	Microwave Oven
Language	English