To Next PageTo Next Page
Need help?Do you have a question about the Sharp SJ-68M-SL and is the answer not in the manual?
General| Brand | Sharp |
|---|---|
| Model | SJ-68M-SL |
| Category | Refrigerator |
| Language | English |
Details on how to attach the energy label to the refrigerator.
Instructions for installing the refrigerator with required ventilation space.
Avoid placing food directly in front of the cold air outlet to prevent freezing.
Use diluted dishwashing liquid for cleaning plastic parts to prevent cracking.
Explains common sounds like cracking, squeaking, and fluid flow as normal.
Diagram showing the external parts of the refrigerator with labels.
Diagram illustrating the internal construction and components of the refrigerator.
Details the external dimensions and required clearance for installation.
Displays the internal dimensions of the refrigerator compartments.
Electrical schematic for SJ-P models.
Electrical schematic for SJ models.
Layout of electrical accessories for SJ-P models.
Layout of electrical accessories for SJ models.
Detailed circuit diagram for SJ-P models.
Controls freezer temperature via thermostat and knob settings.
Manages refrigerator temperature using a damper-thermostat and knob.
Provides temperature values for freezer, refrigerator, and fresh case settings.
Explains that automatic defrosting makes manual operation unnecessary.
Describes how melted frost is handled and evaporated.
Illustrates the defrost cycle stages with circuit diagrams.
Discusses common issues like defrost heater disconnection and thermo. fuse defects.
Explains the role of the hot pipe in preventing dew formation.
Procedures for checking the cooling unit and defrost device after initial start.
Explains the function of the Plasmacluster ionizer to reduce airborne fungus.
Describes the operation and control of the Plasmacluster lamp.
Details the conditions and timing for Plasmacluster operation.
Procedure for assembling the R-control cover unit.
Instructions for forming and handling the damper thermostat sensor.
Steps for applying sealers to the R air guider.
Procedure for installing the Ionizer-K unit.
Instructions for attaching components to the R-C box cover.
Procedures for assembling the R lamp box.
Steps for installing the lamp and its socket.
Procedure for mounting the R-fan motor and fan assembly.
Attaching the fan clamp to the propeller fan shaft.
Instructions for applying a warning label.
Procedures for assembling the E.V cover unit.
Procedure for mounting the fan motor and fan.
Instructions for setting fan motor, defrost thermostat, and fuse assemblies.
Steps for inserting pins into connectors.
Instructions for installing and positioning the F-thermostat.
Diagram showing the location of cooling unit components.
Diagram illustrating the physical layout of cooling unit parts.
