Sharp SJ-BA31DMXAE-EU

Questions and Answers

S
sandradanielsAug 11, 2025
What to do if Sharp Freezer shows E09 error?
- P
  Paul HobbsAug 11, 2025
  If your Sharp Freezer displays an E09 error, it's likely due to a long-term power failure. Here's what you can do: 1. Set the freezer temperature to a colder setting or activate Super Freeze. This should clear the error code once the desired temperature is reached. Keep the doors closed to speed up the process. 2. Remove any food that has thawed or defrosted. These items can still be used soon. 3. Avoid adding fresh food to the freezer until the correct temperature is reached and the error disappears. If the error persists, contact the Sharp help desk.
W
William HallAug 19, 2025
What to do if Sharp Freezer shows E10 error?
- K
  Kelsey WolfeAug 19, 2025
  If your Sharp Freezer is showing an E10 error, it's likely caused by a long-term power failure or leaving hot food in the fridge. To resolve this: 1. Adjust the fridge temperature to a colder setting or enable Super Cool. The error code should disappear once the required temperature is reached. Remember to keep the doors closed. 2. Clear the area in front of the air duct channel holes and avoid placing food too close to the sensor. If the issue continues, contact Sharp help desk.
C
Carol AndrewsAug 26, 2025
What does E11 mean on a Sharp Freezer and how to fix it?
- S
  Steven HaleAug 26, 2025
  If your Sharp Freezer displays an E11 error, here are a few things you can check: 1. Verify if Super Cool mode is activated. 2. Reduce the fridge compartment temperature. 3. Ensure that the vents are clear and not blocked. If the error continues, contact the Sharp help desk.
N
Nathaniel SmithSep 3, 2025
Why does my Sharp SJ-BA31DMXAE-EU Freezer show E08 error?
- A
  andrea96Sep 3, 2025
  The E08 error on your Sharp Freezer indicates that the power supply to the device has dropped below 170W. This is designed to protect the compressor from damage. The voltage needs to be increased back to required levels. If the warning persists, contact the Sharp help desk.