Sharp SJ-F95VM-SS - Temperature Control; Checking Current Temperature Settings; Basic Temperature Adjustment (1°C); Advanced Temperature Adjustment (0.5°C)

9
ENGLISH
Advanced Setting of Refrigerator/Freezer compartment
The temperature of refrigerator compartment and freezer compartment can be adjusted in step of 0.5 °C by following the
steps a to c.
a.
After the step 1 of “Basic operations”,
press
3 seconds or more.
The current preset temperature returns to “Default setting”
(The display is indicated as the picture on the right.)
b.
Press or and set the temperature.
c.
Complete the setting. (Same as the step 3 of “Basic operations”.)
Follow the steps a to c again if you want to adjust the temperature in step of
1°C.
Refrigerator
compartment
Freezer
compartment
Beep beep beep
switch
Controlling temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature as below.
How to check the current
temperature setting
Press button to select or icon.
Setting of Refrigerator / Freezer
compartment
Freezer compartment
: Adjustable between -13°C and -21°C in step of 1°C
Refrigerator compartment
: Adjustable between 0°C and 6°C in step of 1°C
Default setting
Refrigerator compartment Freezer compartment
Basic operations
Display
1
Select or
icon.
Refrigerator
compartment
Freezer
compartment
2
Set the
temperature.
3
Complete
the setting.
(Beep)
Flashing
Flashing
(up)
(down)
When press button, the icons
change in the order shown as below.
:
Standby display
Controlling temperature
Flashing
(B700).indb 9 2016/01/26 13:36:14