Sharp TE-T56U - Page 22

Match
1
2
1
2
3
Lower mortar
Spatula
Tea case
Upper mortar unit
There are three ▼ on the upper mortar unit. Match any of them with the white line “ ”
of the tea case.
Hole
Protrusion
Bottom of the lower mortar
Protrusion
Hole
E-21
CARE AND CLEANING
Assembling the Tea Mortar
Position the “ オモテ[front]” side of the spatula face-up and insert it into the tea case.
Make sure to align the holes of the spatula with the protrusions of the tea case.
Insert the lower mortar into the tea case. (-a) Align the holes on the bottom of the
lower mortar with the protrusions, rotating the lower mortar slowly until it fits
securely. (-b)
2
-a
-b
Place the upper mortar unit onto the lower mortar.
Align "▼" of the upper mortar unit with the white line “ ” of the tea case.
NOTE:
Make sure to face the
“ オモテ(front)” of the
spatula upward
2
2