EasyManua.ls Logo

Sharp VC-A50S

Sharp VC-A50S
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
VC-A10/A10S/A500
VC-A50/A50S/A50SB
VC-A60/A75/A80S
No picture E-E signal. (by pass)
Is picture signal input into the pin(30) of IC201?
YES
YES
YES
YES
NO
NO
NO
NO
NO
Check the line between external video input terminal (J201) and
pin(30) of IC201.
Is picture signal outputted to the pin(52) of IC201?
Check the line between pins(63) and (62) of IC201
and all the way up thru to pins(64) and (65) of IC701.
Is picture signal output to the emitter of video output buffer
(Q251)?
1 Line output: Check video output buffer(Q251) peripheral and output terminal periphery.
2 RF output: Check video output buffer(Q251) peripheral and video input terminal of RF converter periphery.
Is supply voltage of 5V(Y-Vcc) fed to the pin(12) of IC201?
Check the PC 5V line.
Is there Y/C serial data and Y/C signal clock applied
to the pins(63) and (62) of IC201?
Check peripheral circuit of Q251.
FLOW CHART NO.18 E-E MODE TROUBLESHOOTING

Related product manuals