Sharp VC-MH704HM

VCR REMOTE CONTROL
VCR FRONT PANEL/REMOTE CONTROL EQUIVALENT FUNCTIONS.
If you prefer, or if remote control batteries fail, you will need to use the VCR front panel controls. The only
differences in function are shown below:
FUNCTION OSD
On-Screen Display
Moving UP/DOWN menu
Moving LEFT/RIGHT menu
OPERATION WITH REMOTE
CONTROL
[ / ] Menu Select buttons
[ / ] Menu Select buttons
OPERATION WITH VCR
FRONT PANEL
CHANNEL / buttons.
Press the FF or REW buttons
on the front of the VCR.
/
(ii)
2. CHILD LOCK
20. MODE ON SCREEN
DISPLAY
18. MENU SELECT
/ / /
26. PAUSE/STILL
8. AM/PM or
25. PLAY/X2
21. DISPLAY
4. AUDIO OUT
9. REWIND
24. FAST FORWARD
12.SLOW
13. TAPE SPEED
27. DPSS
SLOW SPEED
/
+
7. NUMBER
BUTTONS
17. SET
19. CLEAR
10. STOP
(The STOP button is
also used to switch on the VCR.)
16. SKIP SEARCH
1. STANDBY
3. TIMER ON/OFF
6. SV/V+/TIMER or
PLUSCODE if you
have a VC-MH714HM
23. INPUT SELECT
28. TV/VCR
/
14. BASIC SHARP TV
CONTROLS
11. RECORD
22. CHANNEL UP AND
DOWN
5. MENU
15. ZERO BACK
TINS-3992UMZZ HM Final Cover 12/9/01 10:07 am Page 3