Sharp VC-MH80

VC-MH80
VC-MH90
FUNCTION OF MAIOR MECHANICAL PARTS (BOlTOM VIEW)
Loading Gear
C
Capstan
DO Motor
Reel Belt
Slow
Brake Lever
Master Cam
assett Housing
Drive Gear
/ h
Connect Gear
Clutch Gear
0
1
Connect
Arm
0
6 Reel Pulley
No.
Function No.
Function
1.
Slow brake lever
6. Reel pulley
Gets in contact with the capstan D.D. motor linking to
Transmits the power of the capstan D.D. motor to the
the master cam in the slow still mode, and brakes it to a
reel disk via the reel idler.
certain degree.
3. Capstan D.D. motor
A motive power which runs the tape. It transmits the
power via the reel belt.
8.
Shifter
Transmits the operation of the master cam to break
and loading gear.
4. Reel belt
Transmits the powerto run the tape to the reel pulley.
9.
Take-up loading gear
Shifts the take-up pole base and guide roller via the
loading relay gear, and applies the tape around the
drum assembly, as well as transmits the power to the
supply loading gear.
9