Need help?Do you have a question about the Sharp WN8522D 7-JU and is the answer not in the manual?
Details the WN8522D 7-JU as a dual band wireless 802.11n USB adapter for high-speed data communication.
Lists key features including high speed, backward compatibility, user-friendly utility, encryption, and USB support.
Describes common applications such as home networking for device sharing and wireless multimedia.
Provides a general overview of the hardware, including USB 2.0 interface and chipset-on-board design with external antennas.
Details the hardware architecture, specifically mentioning the Broadcom 43236 single chip USB2.0.
Provides information on the main chipset, BCM43236, a dual band IEEE 802.11n-compliant MAC/PHY/Radio system-on-a-chip.
Specifies the net weight of the device as 13g.
States the PCB dimensions as 16x52mm.
Lists the operating systems supported by the adapter, including Windows 2000, XP, Vista, and Linux Driver.
Details the supported wireless modes, such as AP (Infrastructure) and Client mode.
Outlines the security protocols supported, including Static WEP and WPA(TKIP) with PSK for AP mode, and plaintext for Ad-hoc.
Presents images of the device's external housing from different angles.
Shows images of the Printed Circuit Board (PCB) of the adapter, including front and back views.
Details the supported frequency bands for 802.11n, 802.11g, 802.11b, and 802.11a radios, including regional channel variations.
Lists the number of operating channels compliant with IEEE 802.11b/g/n standards for different regions (US, ETSI, Japan).
Provides transmit power and sensitivity values for different standards (11b, 11g, 11n) across 2.4GHz and 5GHz bands.
Details the typical receive sensitivity levels for various data rates and channel spacings.
Lists the modulation schemes supported by the adapter, from DBPSK to 64-QAM.
Details the current consumption in Watts for transmit (Tx) and receive (Rx) modes at specific conditions.
Specifies operating and storage temperature ranges, and humidity requirements for the device.
Lists available regulatory and certification compliance, including ETSI/CE, FCC, and ESD standards.
Lists referenced industry standards and internal design specifications.
Details the equipment's compliance with FCC Part 15 limits for Class B digital devices and measures to correct interference.
States compliance with FCC radiation exposure limits and advises on installation and operation distance from the body.
To Next Page
General