Sharp XR-32S-L Service Manual

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
OUTLINE AND CHANGED PARTS LIST
OUTLINE.............................................................i
CHANGED PARTS LIST.....................................i
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY
NOTES.............................................................. iii
Precautions for using lead-free solder ............ viii
CHAPTER 1. OPERATION MANUAL
[1] Specifications ................................................. 1-1
CHAPTER 2. ELECTRICAL ADJUSTMENT
[1] ELECTRICAL ADJUSTMENT........................ 2-1
[2] Adjustment mode process menu.................... 2-4
CHAPTER 3. BLOCK DIAGRAM/OVERALL WIRING
DIAGRAM
[1] BLOCK DIAGRAM ......................................... 3-1
[2] OVERALL WIRING DIAGRAM ...................... 3-2
CHAPTER 4. PRINTED WIRING BOARD
[1] MAIN Unit ......................................................4-1
[2] DMD Unit .......................................................4-5
[3] BALLAST POWER Unit.................................4-6
[4] BALLAST CONTROL Unit.............................4-9
[5] R/C RECEIVER Unit/PHOTO SENSOR
Unit ..............................................................4-10
CHAPTER 5. SCHEMATIC DIAGRAM
[1] DESCRIPTION OF SCHEMATIC DIA-
GRAM............................................................5-1
[2] SCHEMATIC DIAGRAM ................................5-2
Parts Guide
TopPage
CONTENTS
No. SY8U3XR32SL//
XR-32S-L/XR-32X-L/PG-F212X-L
XR-32S-L
XR-32X-L
PG-F212X-L
MODELS
DATA PROJECTOR
In the interests of user-safety (Required by safety regulations in some countries) the set should be re-
stored to its original condition and only parts identical to those specified should be used.
This Service Manual covers the differences from XR-32S/XR-32X/PG-F212X. For other technical information, refer
to the XR-32S/XR-32X/PG-F212X (No. S18C8XR-32S/X) Service Manual.
OUTLINE

Sharp XR-32S-L Specifications

General

Resolution	1024 x 768 (XGA)
Contrast Ratio	2000:1
Aspect Ratio	4:3
Lamp Life	2000 hours (Normal mode), 3000 hours (Eco mode)
Dimensions	282 x 87 x 237 mm
Projection Size	40 - 300 inches
Input Ports	1 x S-Video, 1 x Composite
Output Ports	VGA, Audio