Item No. 206051
PORTABLE EVAPORATIVE COOLER
Owner’s Manual
Thank you for choosing the Sharper Image Portable Evaporative Cooler.
Please read this manual carefully before you use the product and keep it safely
reserved for future reference.
- 1 -
PARTS IDENTIFICATION
HOW TO USE
1. Misting Outlet
2. Front Rotary
3. Control Panel
4. Negative Ions Outlet
5. Front Panel
6. Water Level Indicator
7. Base
8. Handle
9. Back Rotary
10. Back Panel
11. Mosquito Repellent Slot
12. Detachable Water Tank
13. Outfall
14. Wheel
1. Before using, make sure the unit is placed on a stable surface. Use the same power supply and
voltage as mentioned on the rating label on the back side of the product. Once the product is
plugged in, the buzzer will beep once then the LED display will illuminate a few seconds later.
The unit will enter standby mode once the power indicator lights up.
2. Switch on: When the unit is stationary, press the “On/Off’ button, the buzzer will beep twice.
Choose your preferred fan speed by pressing the “speed” button on the control panel or on
the remote controller.
3. Wind speed adjustment: Choose from Low, Medium and High. The relative wind circulation
can be set from the control operation on the panel.
1
8
9
10
11
12
13
14
2
3
4
5
6
7
To Next Page
Need help?
General