- 2 -
FEATURES
• Ideal for inflating car tires, motorcycle tires, sporting equipment, etc.
• Inflates a car tire in approximately 6 minutes
• Maximum inflation pressure 120 PSI
• Digital pressure gauge measures in PSI, BAR or kg/cm2
• Accurate to ±0.5 PSI
• Runs on a rechargeable battery or plugs into car cigarette lighter
• LCD display shows the target pressure, pressure units and battery level
IDENTIFICATION OF PARTS
1. High-pressure air compressor
2. Trigger
3. Safety switch
4. LED light
5. Air nozzle
6. Pressure hose holder
7. Fastener
8. Adapter holder
9. Battery pack
10. LCD display
11. Pressure hose with thread connector
12. 12V car cigarette lighter adapter
13. Battery pack (same as #9)
14. AC charger
15. Balloon adapter
16. Sports ball adapter
17. + button (checks pressure setting /
increases pressure value)
18. Unit button (select pressure format:
PSI, BAR or kg/cm2)
19. - button (checks pressure setting /
decreases pressure value)
INSTRUCTIONS FOR USE
–
PLUGGED INTO CAR CIGARETTE LIGHTER
1. Plug the 12V power cord into the 12V DC outlet in your car (the car cigarette lighter).
2. Insert the pressure hose with thread connector into the air nozzle and tighten.
3. Turn on the digital tire gauge by pressing the “UNIT” button. The LCD will light up.
4. Press the “UNIT” button to select your desired pressure format (PSI, BAR or kg/cm2).
5. Press “+” or “-” to check the pre-set level.
6. To increase or decrease the desired pressure, use the “+” or “-” buttons. Press quickly for
small adjustments, press and hold for larger adjustments.
7. When you have selected the desired air pressure, let go of the button. The LCD will flash
for 4 seconds and set itself automatically. Or, you can press the “UNIT” button to set it
manually.
To Next Page
Loading...