Sharper Image IB-ECB100 - Alarm and Timer Functions; Setting Alarms 1 and 2; Using the Snooze Feature; Setting the Sleep Timer

Setting and Using the Alarm:
For your convenience, two separate alarms may be set to accompany individual
wake-up times.
• al1=“Alarm1”
• al2=“Alarm2”
(Refer to Fig.2)
al 1 Button
Short press al 1 button: Set Alarm mode, Beep, Sound, Off
The Alarm 1 bell icon will appear next to the selected mode when alarm is set.
Press and hold the al 1 button:
1. The“ALARM1”iconilluminates,timeashesforhour(HH),press“-/+“button
to change HOUR setting.
2. PressAlarm1buttontoconrmandchangetotheminutesetting.Time
ashesforminutes(MM),press“-/+“buttontochangeMINUTEsetting,wait
for timeout to save and go back to normal mode.
3. Thedigitaldisplaywillthenshow“ALARM1”iconafteryouhavesuccessfully
set the ALARM 1 time.
al 2 Button
Short press the al2 button: Set Alarm mode, Beep, Sound, Off
The alarm 2 bell icon will appear next to the selected mode when alarm is set.
Press and hold the al 2 button:
1. The“ALARM2”iconilluminates,timeashesforhour(HH),press“-/+“
button to change hour setting.
2. PressAlarm2buttontoconrmandchangetominutesetting.Time
ashingforminutes(MM),press“-/+“buttontochangeMinutesetting,wait
for timeout to save and go back to normal mode.
3. Thedigitaldisplaywillthenshow“ALARM2”iconafteryouhave
successfully set the ALARM 2 time.
Snooze:
Whenthealarmsounds,presstheSNOOZE/TIMERbuttontosnooze.Thiswill
automaticallyactivatesnoozetimefornineminutes.PressthePOWERbutton
toturnsnoozeoff.
Timer:
When the power is on and you are listening to a nature sound, you may set a
timer so the unit will automatically turn off.
1. TogglethroughtheSNOOZE/TIMERbuttonuntilyoundthetimeofyour
choice,15,30,45or60minutes.
2. Tocancelthetimer,togglethroughtheSNOOZE/TIMERbuttonuntilthe
LEDlightsays“OFF”orpressPOWER.
(Refer to Fig.2)
8
9