Sharper Image MACH 02

Questions and Answers

D
Dr. Ashley SimmonsJul 30, 2025
What to do if my Sharper Image MACH 02 Blower doesn't turn on?
- S
  Sally TaylorJul 30, 2025
  If your Sharper Image Blower fails to power on, first, check the power connection to ensure it is properly plugged in. If the outlet is worn or damaged, try another outlet or contact a qualified electrician. If the unit is still not working, cease usage, unplug it, and contact Consumer Service for assistance, as the unit may be damaged or in need of repair.
A
arussellAug 9, 2025
Why is the airflow weak in my Sharper Image MACH 02?
- Z
  Zachary ScottAug 9, 2025
  If the airflow of your Sharper Image Blower is weak or slow, start by checking for any blockages in the air inlet or outlet. Remove any obstructions and clean the filter and nozzle attachment. Also, verify that the unit is set to a higher speed setting, as it may be currently set too low.
W
wsotoAug 19, 2025
What to do if the nozzle attachment falls off my Sharper Image MACH 02 Blower?
- L
  leslie95Aug 19, 2025
  If the nozzle attachment keeps falling off your Sharper Image Blower, ensure that the nozzle attachment is properly installed. Refer to the HOW TO USE section of the manual and make sure the attachment is securely in place before use.

Summary

Important Safety Instructions

Intended Use

Specifies the product's intended purpose for dusting small, hard-to-reach spaces in the US.

Installation Warnings

Provides critical warnings regarding fire, electrical shock, and injury during installation.

Safe Use Warnings

Details essential safety precautions for operating the appliance to prevent hazards.

Grounding Instructions

Explains the importance of grounding and proper connection for electrical safety.

Servicing Warnings

Advises on safe practices for cleaning and repair to avoid shock or damage.

Product Information

Included Components

Lists and illustrates all parts and accessories included with the air duster.

How to Use

Powering On and Off

Step-by-step guide on how to turn the unit on, change speeds, and turn it off.

Using Attachments

Instructions on attaching and using various nozzles and adapters for different tasks.

Cleaning and Storage

Cleaning Procedures

Details on how to clean the air duster, its parts, and the filter.

Storage Recommendations

Guidance on proper storage to ensure the longevity of the air duster.

Warranty Information

Warranty Coverage Details

Explains the two-year limited warranty, coverage, and claim process.

The Sharper Image High Velocity Air Duster, Model MACH 02, is a versatile appliance designed for dusting small, hard-to-reach spaces. It is intended for use in the United States and is not suitable for commercial or industrial applications. The manufacturer emphasizes that unauthorized use or product modification will void the warranty.

Function Description:

The primary function of the High Velocity Air Duster is to provide a powerful stream of air for cleaning dust and debris from various surfaces and crevices. It features an On/Off button with two speed settings (HIGH and LOW) and an LED light for improved visibility during operation. The device is equipped with multiple attachments to cater to different cleaning needs, including a Wide Nozzle with Brush Tip, Extension Nozzle, and Jet Nozzle with Brush Tip. Beyond dusting, the appliance also offers inflate and deflate functionalities, making it useful for a broader range of tasks. It comes with Inflate Adapters for various inflation needs and a Deflate Adapter for quick deflation.

Important Technical Specifications:

While specific technical specifications like motor power or airflow volume are not explicitly detailed in the provided manual, the device operates on a nominal 120-V circuit and requires a properly grounded outlet. It is equipped with a three-prong grounding plug, and the use of three-wire outdoor extension cords with corresponding grounding plugs and receptacles is recommended if an extension cord is necessary. The product includes a 10-foot power cord (not shown in the product information diagram).

Usage Features:

Power Control: The device is powered on and off by touching the designated button. The LED light illuminates when the unit is on. Users can switch between HIGH and LOW speeds by touching the button again.
Attachment System: The air duster utilizes a system of interchangeable nozzles that securely attach to the Air Outlet. These include:
- Wide Nozzle with Brush Tip (7): Likely for broader surfaces or areas requiring agitation to dislodge dust.
- Extension Nozzle (8): For reaching deeper or more confined spaces.
- Jet Nozzle with Brush Tip (9): For focused, powerful air streams, possibly with the added benefit of brushing.
Inflation/Deflation Capability: The device extends its utility beyond dusting with inflation and deflation features.
- Inflate Adapters (11): These are attached to the Air Outlet for inflating various items. Users are instructed to select the appropriate adapter for the task.
- Deflate Adapter (10): For deflation, this adapter is attached to the bottom of the product (Air Inlet) and twisted clockwise into a locked position. Once secured, the appropriate Inflate Adapter is then attached to the Deflate Adapter.
Safety Precautions during Use: The manual emphasizes several safety guidelines:
- Always ensure attachments are securely fastened before operating the unit.
- Point the unit towards a safe area before turning it on.
- Do not use attachments not specifically intended or sold by the manufacturer.
- The filter must always be installed during operation. Only use filters provided with the product.
- Avoid using the appliance on wet surfaces or exposing it to rain.
- Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
- Do not insert any objects into openings and ensure all openings are free of dust, lint, hair, or anything that could obstruct airflow.
- Do not use near flammable or combustible liquids.

Maintenance Features:

Regular cleaning is essential for maintaining the performance and longevity of the High Velocity Air Duster.

General Cleaning:
- Always power off and unplug the unit before cleaning.
- The unit and its attachments can be dusted or wiped with a damp cloth.
- Nozzle attachments can be rinsed thoroughly with water, but they must be completely air-dried or dried using the Air Duster itself before reinstallation.
- Important Note: Attachments are explicitly stated as NOT dishwasher safe.
Air Inlet and Outlet Cleaning: Users should regularly check and clean the Air Inlet and Air Outlet to remove any dust or objects that could block airflow.
Inlet Dust Filter (6) Maintenance:
- The Inlet Dust Filter is located at the bottom of the product in the Air Inlet.
- It must always be installed and should only be replaced with filters provided by the manufacturer.
- For optimal performance, the filter should be cleaned or replaced frequently.
- To clean the filter, rinse it under water and allow it to air dry completely before reinstalling.
- For replacement filters, customers are advised to contact Consumer Service at 833-800-8669.
Motor Lubrication: The motor is permanently lubricated and does not require oiling.
Storage:
- Do not store the unit outdoors.
- For extended periods of non-use, unplug the product and loosely bundle the cord.
- Cover the unit or place it back in its original retail carton (if available) to prevent dust accumulation.
- Store the Air Duster in a cool and dry location.
Repair and Servicing: The manual explicitly states that the Air Duster has no user-serviceable parts inside and cannot be opened for cleaning. All service and/or repairs must be performed by a Sharper Image Authorized Service Center to avoid the risk of electrical shock and to maintain warranty validity. Opening the appliance housing is prohibited.

The Sharper Image High Velocity Air Duster is designed to be a user-friendly and effective tool for household dusting and light inflation/deflation tasks, with a strong emphasis on safety and proper maintenance to ensure its longevity and performance.