Basic Cleaning
Note: Avoid aggressively “jamming” the bristles in and out of
the grid. This could bend the cleaning tool bristles and make it
difficult to use.
Do not use towel, sponge, abrasive or sharp objects to clean the
collector grid. Collector plates are fragile and covered with plastic
insulation that could be easily damaged.
Before reinstalling, allow the grid to dry overnight. If the grill is
still slightly damp, the unit performs a “drying cycle” to remove
excess moisture before normal operation resumes.
Note: This drying cycle functions to remove small amounts of
residual moisture. Do not rely upon this feature to dry a wet grid.
To Next Page
Loading...
