Need help?Do you have a question about the Shel lab SMI Series and is the answer not in the manual?
Covers safety testing and compliance for electrical, mechanical, and fire hazards.
States that units meet electromagnetic compatibility, low-voltage, and RoHS directives.
Identifies the manufacturer as ISO 9001 certified.
Emphasizes reading the manual for safe installation, operation, and maintenance.
Covers essential safety precautions, laws, regulations, and local ordinances for unit use.
Specifies intended use for non-humidified microbiological incubation in professional environments.
Details safe power cord connection, grounding, and handling precautions.
Provides contact details, phone hours, email, and fax for assistance.
Details the need for a reference sensor device for accurate temperature calibration.
Warns against using alcohol or mercury thermometers due to accuracy limitations.
Detailed steps for inspecting the shipping carton and the unit for any damage.
Visual diagrams labeling key components of the SMI2s incubator model.
Details the ports and connections found on the left and right sides of 100-120V and 220-240V models.
Instructions on recording data plate details for customer support and reference.
A checklist to ensure all necessary steps are completed before and during unit installation.
Details acceptable ambient conditions and clearances for optimal unit placement and ventilation.
Outlines voltage, amperage, grounding, and circuit breaker needs for 100-120V models.
Outlines voltage, amperage, grounding, and circuit breaker needs for 220-240V models.
Guides on safely lifting, handling, pallet removal, and leveling the incubator.
Covers cleaning, water usage, and disinfection of the chamber.
Step-by-step instructions for installing shelves and setting up the chamber access port.
Explains the meaning of various symbols found on the unit for hazards, components, and notes.
Explains the mechanical heating cutoff that prevents unchecked heating by rerouting power.
Describes the power switch and the heating indicator's function for element power.
Details the touch display, current/setpoint temps, and primary function buttons.
Explains how to mute audible alarms and set the incubation chamber operating temperature.
Describes the heating indicator's bar graph and how to view the data log graph.
Guides users on accessing and navigating the settings menu for various functions.
Explains how the heating, cooling, OTL, and data logging systems work.
Step-by-step guide to plug in, turn on, and prepare the incubator for initial use.
Guides on setting the incubator's internal date and time for accurate logging.
Instructions on changing the incubator's operating temperature setpoint from the default.
How to set parameters for the temperature deviation alarm to trigger alerts.
Procedure to set the mechanical heating cutoff to prevent over-temperature conditions.
Steps to set a passcode to lock temperature and other settings for security.
How to unlock settings, change the passcode, or disable passcode locking.
Explains door open and temperature deviation alarms, and how to mute them.
Provides guidelines for loading samples and details the internal chamber power outlet.
Explains how the unit stores settings and log data in non-volatile memory during power outages.
Describes what data is logged, how it's stored, and how to view it as a graph.
Steps to copy and export log data to a USB drive in CSV format.
Details TEMP and ALARM ports for data output and the accessory expansion port.
Warns against excess humidity, deionized water, and managing small sample loads.
Explains condensation, dew point, and factors influencing their formation in the chamber.
Provides checks and actions to take if excessive condensate appears in the chamber.
Guidelines for cleaning and disinfecting the unit chamber and display screen safely.
Details cleaning recommendations and disinfecting considerations for the unit.
Suggestions for reducing contamination exposure and procedures for storing the incubator.
Explains the process of calibrating the temperature display using a reference device.
Lists shipping/net weights and exterior/interior dimensions in inches and millimeters for each model.
Details the cubic feet, liter capacity, and weight limits for shelves and chambers.
Specifies the operating temperature range, uniformity, and stability for all models.
Lists voltage, amperage, and frequency requirements for 100-120V and 220-240V models.
Provides information on ordering accessories and replacement parts online or via contact.
Covers safety testing and compliance for electrical, mechanical, and fire hazards.
States that units meet electromagnetic compatibility, low-voltage, and RoHS directives.
Identifies the manufacturer as ISO 9001 certified.
Emphasizes reading the manual for safe installation, operation, and maintenance.
Covers essential safety precautions, laws, regulations, and local ordinances for unit use.
Specifies intended use for non-humidified microbiological incubation in professional environments.
Details safe power cord connection, grounding, and handling precautions.
Provides contact details, phone hours, email, and fax for assistance.
Details the need for a reference sensor device for accurate temperature calibration.
Warns against using alcohol or mercury thermometers due to accuracy limitations.
Detailed steps for inspecting the shipping carton and the unit for any damage.
Visual diagrams labeling key components of the SMI2s incubator model.
Details the ports and connections found on the left and right sides of 100-120V and 220-240V models.
Instructions on recording data plate details for customer support and reference.
A checklist to ensure all necessary steps are completed before and during unit installation.
Details acceptable ambient conditions and clearances for optimal unit placement and ventilation.
Outlines voltage, amperage, grounding, and circuit breaker needs for 100-120V models.
Outlines voltage, amperage, grounding, and circuit breaker needs for 220-240V models.
Guides on safely lifting, handling, pallet removal, and leveling the incubator.
Covers cleaning, water usage, and disinfection of the chamber.
Step-by-step instructions for installing shelves and setting up the chamber access port.
Explains the meaning of various symbols found on the unit for hazards, components, and notes.
Explains the mechanical heating cutoff that prevents unchecked heating by rerouting power.
Describes the power switch and the heating indicator's function for element power.
Details the touch display, current/setpoint temps, and primary function buttons.
Explains how to mute audible alarms and set the incubation chamber operating temperature.
Describes the heating indicator's bar graph and how to view the data log graph.
Guides users on accessing and navigating the settings menu for various functions.
Explains how the heating, cooling, OTL, and data logging systems work.
Step-by-step guide to plug in, turn on, and prepare the incubator for initial use.
Guides on setting the incubator's internal date and time for accurate logging.
Instructions on changing the incubator's operating temperature setpoint from the default.
How to set parameters for the temperature deviation alarm to trigger alerts.
Procedure to set the mechanical heating cutoff to prevent over-temperature conditions.
Steps to set a passcode to lock temperature and other settings for security.
How to unlock settings, change the passcode, or disable passcode locking.
Explains door open and temperature deviation alarms, and how to mute them.
Provides guidelines for loading samples and details the internal chamber power outlet.
Explains how the unit stores settings and log data in non-volatile memory during power outages.
Describes what data is logged, how it's stored, and how to view it as a graph.
Steps to copy and export log data to a USB drive in CSV format.
Details TEMP and ALARM ports for data output and the accessory expansion port.
Warns against excess humidity, deionized water, and managing small sample loads.
Explains condensation, dew point, and factors influencing their formation in the chamber.
Provides checks and actions to take if excessive condensate appears in the chamber.
Guidelines for cleaning and disinfecting the unit chamber and display screen safely.
Details cleaning recommendations and disinfecting considerations for the unit.
Suggestions for reducing contamination exposure and procedures for storing the incubator.
Explains the process of calibrating the temperature display using a reference device.
Lists shipping/net weights and exterior/interior dimensions in inches and millimeters for each model.
Details the cubic feet, liter capacity, and weight limits for shelves and chambers.
Specifies the operating temperature range, uniformity, and stability for all models.
Lists voltage, amperage, and frequency requirements for 100-120V and 220-240V models.
Provides information on ordering accessories and replacement parts online or via contact.
General| Brand | Shel lab |
|---|---|
| Model | SMI Series |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
