Automatic charging
NOTICE
When connectedto theoutlet,the productstartschargingfew secondsafter connecting
thecharginggun . to thevehicle'schargingsocket.
Theproductautomaticallydetectsoutletvoltage and maximumallowable input current
of yourvehicle.
Theproductswitchesoff automaticallyoncethe vehicle'sbattery isfully charged.
a pug2.
3.
4.
5.
Remove theplugcovera
Connectthe charginggun's •
indicator@lightsupgreen.
to the vehicle'schargingsocket.Thecurrentbutton
After few seconds,the productentersthe Charging mode.Thecurrentbutton
indicator@blinksgreen.
Tostopcharging,pressandholdthetimer andcurrent@buttonsfor2secondsor
unplug the charging gun •
anddisconnectthechargingguna fromthevehicle's
Press the release lever
charging socket. Reinstall theplugcovera
Ready
Display
J 95+
CONNECT
Charging
Display
CHARGING
220V
2 00kW 5 00kWh
2201/
01
16A/32A
2 OOkW S OOkWh
Operation
Iftimedelay modewas not set,the productis ready to
charge.Currentbuttonindicator@lightsupgreen.
Operation
When chargingis in progress,thecurrentbutton
indicator@blinksgreen.
10
To Next Page
Loading...
