Shell Recharge - Page 11

NOTICE: Using both vehicle and EV charger delayed
charging may cause charging anomalies.
Manual charging - Setting the output current
Display Operation
95+
220V
01
I GA / 32A
2 OOkW 5 OOkWh
•
Pressandholdthecurrentbutton@for2 seconds
to enterthe output setting.
Pressthecurrentbutton@repeatedlytoselect
desiredoutputcurrent:
For 240 V:
SEV-40-03
12 A 16 A 24 A 32 A 40 A
Release the button and wait for 2 seconds to
confirm.
Theproductstartschargingautomaticallyfew
secondsafter it isconnectedto vehicle'scharging
socket.
NOTICE: The voltage is detected automatically and
cannotbe changedby the user.
Manual charging - Setting the delayed charging
time
Operation
Thismode allows to schedule a charge at night when
theelectricityratesare lower.
Press and hold the timer button for 2 seconds to
enterthe timedelay mode.Thedisplay
blinks.
PressthetimerbuttonC: repeatedlytosetthedelay
time. Choose from I to 24 hours.
• Release the button and wait for 2 seconds to
confirm.
NOTICE: To cancel the time delay mode, pressand
holdthetimerbuttonC: for2 secondsagain.Thetime
delayandthetimerbuttonindicatorsC: gooff.
NOTICE: Usingbothvehicleand EVchargerdelayed
chargingmay causecharginganomalies.
11
Display
95 F
DELAY CH
ooov
OOA/
O OJkW O OOkWh