What to do if ShenPaz Sintra Dental equipment shows ERROR OUT OF RANGE?
If your ShenPaz Dental equipment displays an 'ERROR OUT OF RANGE' message, this indicates that you've entered a value outside of the acceptable range during programming. The solution is to re-enter a value that falls within the specified limits.
Why ShenPaz Sintra furnace does not turn on?
If your ShenPaz Dental equipment furnace isn't turning on, first ensure that it is properly plugged into the electricity supply and that the power switch is in the “On” position. If the problem persists, inspect all three fuses using an Ohm meter and replace them if necessary. If the fuses are okay, it's recommended to contact a certified technician for further inspection.
General| Brand | ShenPaz |
|---|---|
| Model | Sintra |
| Category | Dental equipment |
| Language | English |
To Next Page
