or long press “Previous / Next” / or “V+ / V-” / both can
change the hour up or down. (The machine has an AM PM system. One hour is skipped every 12
hours during setting hour)
2. After the hour is set, the minute number flashes after 5S no operate. Or short press “M” key
to enter minute setting. Short press or long press “Previous / Next” / or
“V+ / V-” / both can change the minute up or down.
3. In the hour or minute setting, short press or long press “M” key or “Play” key
to confirm current time setting and saved. Or can also automatically confirmed after 5S no
operate.
B: Alarm Settings
This machine can set 2 groups of alarm.
1. When CLOCK mode. The hour number flashes when long press “Alarm 1” , at the
same time the icon of the Alarm 1 lights up.
Short press or long press “Previous / Next” / can change the hour up or
down. (The machine has an AM PM system. One hour is skipped every 12 hours during setting
hour)
2. After the hour is set, the minute number flashes after 5S no operate. Or short press “M” key
to enter minute setting. Short press or long press “Previous / Next” /
can change the minute up or down.
3. In the hour or minute setting, short press or long press “Play” key to confirm current
time setting and saved. Or can also automatically confirmed after 5S no operate.
4. Short press the “Snooze” button to select 5 kinds of alarm sounds in the process of
setting the hour or minute number flashes.
Short press or long press the “Play” button to confirm the current ringtone, while
saving the current alarm time.
5. After saving and exiting, return to CLOCK function status. The icon of Alarm 1 will light
on CLOCK interface, the Alarm 1 setting is valid.
Alarm 2 setting is same as Alarm 1 setting...
C: Check / Cancel Alarm and Snooze
1. Check Alarm 1: When CLOCK mode. Short press “Alarm 1” to show Alarm 1 setting
To Next Page
Loading...