What to do if Shenzhen Mindray Bio-Medical Electronics MEC-1000 Monitor shows "XX TOO HIGH"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays the message "XX TOO HIGH", it means the XX value exceeds the higher alarm limit. You should check if the alarm limits are appropriate and assess the patient's current situation. Also, verify the connection of the electrodes and lead wires.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "ECG WEAK SIGNAL"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "ECG WEAK SIGNAL", it means that the ECG signal of the patient is too small for the system to perform ECG analysis. Check if the electrodes and lead wires are connected correctly and assess the patient's current situation.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "NO PULSE"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "NO PULSE", it indicates that the pulse signal of the patient is too small for the system to perform pulse analysis. Check the connection of the sensor and assess the patient's current situation.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "RESP APNEA"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "RESP APNEA", it means the respiration signal of the patient is too small for the system to perform RESP analysis. Check the connection of the linking wire and assess the patient's current situation.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "ASYSTOLE"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "ASYSTOLE", it indicates the patient suffers from Arr. Of ASYSTOLE. Check the current situation of the patient and verify the connection of the electrodes and lead wires.
What to do if Shenzhen Mindray Bio-Medical Electronics MEC-1000 displays "VFIB/VTAC"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "VFIB/VTAC", it indicates the patient suffers from Arr. of VFIB/VTAC. Check the current situation of the patient and verify the connection of the electrodes and lead wires.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "BIGEMINY"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "BIGEMINY", it indicates the patient suffers from Arr. Of BIGEMINY. Check the current situation of the patient and verify the connection of the electrodes and lead wires.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "TRIGEMINY"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "TRIGEMINY", it indicates the patient suffers from Arr. of TRIGEMINY. Check the current situation of the patient and verify the connection of the electrodes and lead wires.
What to do if Shenzhen Mindray Bio-Medical Electronics Monitor displays "R ON T"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "R ON T", it indicates the patient suffers from Arr. of R ON T. Check the current situation of the patient and verify the connection of the electrodes and lead wires.
What to do if Shenzhen Mindray Bio-Medical Electronics MEC-1000 displays "PVC"?
If the Shenzhen Mindray Bio-Medical Electronics Monitor displays "PVC", it indicates the patient suffers from Arr. of PVC. Check the current situation of the patient and verify the connection of the electrodes and lead wires.
General| ECG | Yes |
|---|---|
| SpO2 | Yes |
| NIBP | Yes |
| Respiration | Yes |
| Temperature | Yes |
| Pulse Rate | Yes |
| Parameters | ECG, SpO2, NIBP, Respiration, Temperature, Pulse Rate |
| Power Supply | 100-240VAC, 50/60Hz |
| Display Type | TFT LCD |
Describes symbols for warnings, cautions, and notes used in the manual.
General overview of patient monitors and their importance in medical devices.
Specifies the intended applications and clinical areas for the MEC-1000.
Details the temperature, humidity, altitude, and electrical requirements.
Explains the overall working principle and structure of the MEC-1000 monitor.
Details the functions, schematic, and components of the main control module.
Describes the measurement of physiological parameters (ECG, RESP, TEMP, SpO2, NIBP).
Explains the function and schematic of the power supply board.
Details the keyboard as a man-machine interface and its schematic.
Describes the recorder module's function and schematic.
Classifies the device based on anti-electroshock type, EMC, and liquid proofing.
Lists overall technical specifications including size, environment, and display.
Details specifications for ECG, RESP, NIBP, SpO2, and TEMP measurements.
Provides exploded views of various assembly parts like screen, bracket, and panels.
Instructions and precautions for battery usage and maintenance.
A comprehensive list of all parts for the MEC-1000.
Outlines the steps for connecting, inspecting, and testing monitor functions.
Detailed procedure for testing ECG and Respiration measurements.
Detailed procedure for testing NIBP measurements.
Detailed procedure for testing SpO2 measurements.
Describes the method for calibrating NIBP static pressure.
Covers essential safety tests like earth resistance and leakage current.
Procedures for pre-use and routine system checks.
Guidelines for cleaning the monitor and its components.
Lists recommended cleaning agents.
Guidelines for sterilization and disinfection procedures.
Solutions for white or blurring screen problems.
Troubleshooting steps for encoder malfunctions.
Solutions for problems with alarm sound.
Troubleshooting steps for issues related to the printer.
Solutions for abnormal paper feeding in the recorder.
Lists various system alarms, their causes, and recommended measures.
Describes user-level maintenance settings like language and alarm sound.
Outlines factory-level maintenance options.
Information regarding user, factory, and demo keys.
To Next Page