Need help?Do you have a question about the Shenzhen Willhi Electronics WH7016C and is the answer not in the manual?
Controls advance model features, allowing only temperature adjustment.
Explains the meaning of WORK and SET LED indicators during operation.
Lists and describes system menu codes (HC, D, LS, HS, CA, PT, AH, AL, AT).
How to set the cooling (C) or heating (H) mode using the SET key.
How to set the temperature difference (D) that defines the ON/OFF interval.
How to adjust the temperature calibration (CA) for accurate readings.
How to set the delay time (PT) for compressor protection.
Sets the adjustable range for the OFF temperature point using HS and LS.
Configures the threshold (AH) for high temperature alerts.
Configures the threshold (AL) for low temperature alerts.
How to enable or disable the timer off function (AT) for automatic shutdown.
General| Type | Digital thermostat |
|---|---|
| Temperature Control Accuracy | ±1°C |
| Sensor Type | NTC sensor |
| Control Accuracy | ±1°C |
| Output Type | Relay output |
| Temperature Measuring Range | -50°C to 110°C |
| Temperature Control Range | -50°C to 110°C |
| Temperature Range | -50°C to 110°C |
To Next Page
