Sherline Products 4400 Operating Instructions

SHERLINE Lathe Operating Instructions
(Reprinted from the Sherline Assembly and Instruction Guide, Fourth Edition (1997)
CAUTION!
Read all operating instructions carefully
before attempting any machining operations!
Review Safety Rules for Power Tools before beginning.
Lathe Operating Instructions

Sherline Products 4400 Specifications

General

Distance Between Centers	16 inches
Motor Power	1/2 HP
Speed Range	70-2800 RPM
Spindle Speed	70 to 2800 RPM
Tailstock Taper	MT2
Swing Over Bed	8 in (200 mm)
Spindle Bore	0.750" (19 mm)